NZXT H510 Elite CA-H510E-W1 Compact Mid Tower Matte White Chassis with Smart Device 2

star_outline star_outline star_outline star_outline star_outline
0 Ratings & Reviews SKU_QWRZ0

৳ 13,000

In stock

Hurry-up! Only 1 left


Key Features

  • Two tempered glass panels for showcasing stunning RGB builds.
  • Two Aer RGB 2 fans and one RGB LED are included
  • Removable radiator mounting bracket and simple-to-use SSD trays
  • Patented cable management system
  • Smart Device 2 with two RGB lighting channels and three fan channels that support 0dB modes for voltage-regulated or PWM fans
  • USB 3.1 Gen 2-compatible USB-C connector

NZXT CA-H510E-W1 H510 Elite Compact Mid Tower Matte White Chassis with Smart Device 2

NZXT CA-H510E-W1 H510 Elite Compact Mid Tower Matte White Chassis with Smart Device 2 Features:

Dimensions W: 210mm H: 435mm D: 428mm (without feet)
W: 210mm H: 460mm D: 428mm (with feet)
Material(s) SGCC Steel, Tempered Glass
Weight 7.5 kg
Clearance Cable Management: 19-23mm
GPU Clearance: Up to 368.6mm w/o front radiator installed, up to 313.6mm with front radiator installed
Vertical GPU Mount Clearance: 40.64mm
CPU Cooler: Up to 165mm
Front Radiator: 60mm
Rear Radiator: 60mm
Reservoir & Pump: Up to 180mm (Along cable bar), Up to 86mm (Along bottom panel)
Motherboard Support Mini-ITX, MicroATX, ATX
Front I/O Ports 1x USB 3.1 Gen 2 Type-C
1x USB 3.1 Gen 1 Type-A
1x Headset Audio Jack
Front I/O internal header
1x USB 3.1 Gen 2 Internal Header
1x USB 3.1 Gen 1 Internal Header
1x USB 2.0 Internal Header
1x HD Audio Header
Filters All Air Intakes
Smart Device V2 3x Fan channels with Max 10W per channel output*
2x RGB LED channels, each supporting up to 4x HUE 2 addressable LED strips or 5x Aer RGB 2 fans
Built-in noise detection module
*Note: If a splitter is used, fan control is regulated depending on the fan connected to the 4-pin port. Do not use low-noise adapters.
RGB LED Lighting 2x Integrated Aer RGB 2 140mm Fans
1x Integrated addressable LED Strip
Vertical GPU Mount 2 Slots
Drive Bays 2.5″: 2+1
3.5″: 2+1
Expansion Slots 7
Radiator Support Front: 2x 140 or 2x 120mm with Pull
*Note: Need to remove RGB fans if you plan to mount the radiator to the front
Rear: 1x 120mm
Fan Support Front: 2x 120/ 2x 140mm (2x AER RGB 2 140mm included)
Top: 1x 120mm/ 1x 140mm (1x AER F140 Case Version Included)
Rear: 1x 120mm (1x AER F120 Case Version Included)
Fan Specs Aer RGB 2 (140mm)
Speed: 500-1,500 RPM
Airflow: 30.39 – 91.19 CFM
Noise: 22 – 33 dBA
Air Pressure: 0.17 – 1.52mm-H2O
Bearing: Fluid Dynamic Bearing
Fan Connector 4-Pin PWM